Senin, 11 Agustus 2014

Making arrangement (bulkhead) shelving

Making arrangement (bulkhead) shelving units are ideal not more than 5 layers. Each layer of this shelf is able to load or polybag accommodate as many as 2 pockets to the vertical direction and 15-16 pieces to the horizontal direction. Rack unit size of 3 m (length) and 40 cm (width and height) can be filled about 60 bags of poly bag so that the entire rack unit composed of 5 layers can be filled about 300 bags polybags.

The composition of the shelf bottom layer is made of about 20 cm - 25 cm above the surface of the ground floor for air circulation in this section is not hampered and fungal fruiting bodies that grow in the lining of the bottom shelf is not touched and contaminated by feces that contaminate the ground floor. Similarly, the room is not filled with mushroom units rack. Provide an empty spot about 25% of the ground floor area of ​​the room mushroom house on one side of the room as a place of incubation. On each measure 84 m² mushroom house can be made about 18-20 units of rack with 1 unit inkubas floor.

The roof and walls are sealed and sturdy mushroom house. Roof kumbung practical and cost-effective can be made of sago palm leaves woven. The long side of the mushroom house walls made of 2 layers, the top layer is made of woven bamboo, while the bottom layer is made of as high as 1 m layer of clear plastic (transparent). If the conditions are not good, especially the mushroom room humidity is rather low, then the entire roof and walls need to be covered with plastic sheets mushroom house.

After an incubation period followed by planting. Seeds fungus that grows well soon arranged on shelves layers. While preparing mushrooms polybag seedlings, as well as the selection. Seeds that do not grow well and contaminated by dirt and other fungi collected in sacks and thrown away or burned Badak88 Agen Bola Resmi Promo 100% SBOBET IBCBET Jelang Piala Dunia 2014.

Polybag arranged tilted to the left and to the right. The top (lid) polybag tilted toward the intersection while the base intersect.

Completed preparation of poly mycelium growth can be monitored. In this monitoring or the identification of re-examination of the mycelium in a polybag. If found in a polybag growing mycelium less well, it must be immediately removed and discarded, and then replaced with another polybag or left blank.

Upon the whole, or about 75% of the surface pores of the growing medium covered by the mushroom mycelium, the immediate growth of fungi by means of tearing the plastic polybag. Penyobekan performed on the curved section near the end of the polybag. Cutouts forming the letter L or rectangular hole measuring 1 cm x 1 cm. Cutouts have to form an L-shaped bracket toward the open end of polybag.

Tidak ada komentar:

Posting Komentar